Students, Please study the information below. You will be taking a Quiz on this information.
You MUSTpass with at least a 100% in order to be allowed in the darkroom.
Your FIRST attempt grade is what will go in the grade book. However, you may take to test over again as many times as you need until you pass with a 100% to go into the darkroom and start on our next assignment.
Introduction Safety and health rules and regulations should be understood and practiced by everyone. This is true whether you are at school, work, or home. Safety is defined as action taken to prevent or reduce the possible of personal injury. Health is defined as freedom from physical disease or pain. The roles of safety and health are the same no matter where you are. Safety and health rule protect you and those around you from injury. Safety and health are everyone’s responsibilities.
In this lesson, we will explore the federal and state safety regulations, general health and safety practices, fire safety, eye safety, and what to do in case of an accident.
Safety Laws Safety is a serious matter. There are state and federal laws to enforce safety standards. The Occupational Safety and Health Act of 1970 is a law that governs federal safety standards. This law created the Occupational Safety and Health Administration, or OSHA, to assure that every working person is in a safe and healthful working environment. Setting standards and inspecting workplaces are some of the functions of OSHA. One important OSHA standard is the Hazard Communication Standard. This is a set of rules for any business or school that uses chemicals or other substances that can be a safety risk. This standard requires that a school or company keep on file a Material Safety Data Sheet (MSDS) for each hazardous substance. This form contains the name of the chemical, safe exposure levels, explosion and health hazard information, and precautions for safe use, disposal methods, and first aide treatment information. Many state laws are similar to the OSHA standards.
General Safety Practices General safety practices involve using common sense. Safety practices can be broken down into several sub-areas.
Conduct: refers to the correct behavior in the appropriate place and at the appropriate time. The way you conduct yourself in various situations involves using common sense and good judgment. Unsafe conduct can endanger everyone. Rules for proper conduct are:
Know the safety rules and follow them.
The lab and its equipment should be used only when the teacher is present.
Disruptive behavior will not be tolerated in the classroom.
Report unsafe conditions immediately.
Unsafe actions such as running or throwing objects will not be permitted.
Chairs or stools should never be leaned back or tilted back while sitting in them. Falls can result in serious head or back injuries.
Personal Attire: refers to the clothing and protective devices that should be worn for the activity you are doing. Accidents can result when clothing becomes caught in machinery or when chemicals splash. Rules for personal attire are:
Use approved safety glasses or goggles when needed.
Wear a lab coat or apron to protect clothing.
Secure loose clothing and hair.
Equipment and Tool Use: refers to how you should handle and use tools. Tools and equipment make our task easier, but you must understand how to use them. Rules for equipment and tool use are:
Use tools and equipment only after a demonstration and or safety check.
Never use equipment that is out of order. If a machine does not seem to be working properly, tell the teacher.
Be careful when using sharp tools. Keep the points turned away from you and others.
Using Electricity: many of the tools and equipment that we use are powered by electricity. Electrical shock can be fatal. Rules for working around electricity are:
Do not use equipment with damaged or exposed electrical wires. Report it.
Equipment should be grounded.
Never use electrical equipment on a wet surface.
Do not touch electrical switches or equipment with wet hands.
Handling Chemicals and Other Liquids: chemicals are necessary in many school and work environments. Rules for working with and around chemicals are:
Spilled liquids should be wiped up immediately to avoid slipping.
Keep your hands away from your eyes when using chemicals. Wash your hands after using chemicals.
Know the procedures for washing your eyes in case they are exposed to a chemical.
Identify the contents of bottles and containers by label; never trust taste or smell.
Know the formula and mixing procedure before handling chemicals.
Maintenance: improves the appearance of the working area, but more importantly, it makes it safer. Accidents often occur in areas that are dirty, cluttered, and unsanitary. Rules for maintenance are:
Thoroughly clean your work area at the end of each class.
Tables, counters, and sinks should be clean.
Store materials, projects, and equipment in approved locations.
Floors must be kept free of objects or materials that might cause falls.
Aisles should be kept clear at all times.
Fire Safety You should be familiar with the procedures to follow in case of a fire. Your teacher or another adult should be notified immediately. Know how to exit the building. Fires are classified as A, B, or C.
Type A fires involve combustible materials such as wood, paper, or cloth.
Type B fires involve flammable liquids such as solvents and oil.
Type C fires involve electrical equipment.
Fire extinguishers are labeled to show what type of fire they can extinguish. Fire extinguishers in schools are a type ABC. This allows them to be used on any type of fire. If you must use a portable fire extinguisher, use the PASS method. This stands for:
Pull the pin
Aim low
Squeeze the handle.
Sweep from side to side.
Protecting Your Eyes Much of what you learn is by sight. Since you only have one pair of eyes, take precautions to protect them. The American National Standards Institute (ANSI) has developed standards for safety eyewear. The standard for safety eyewear is ANSI Z87 and safety eyewear that meets this standard is stamped Z87.
One of the most common times when eyewear protection is necessary in a communication lab is when you are handling and mixing chemicals. Safety glasses should be worn at all times when you are involved in this activity.
In all cases of eye contact with chemicals, flood the eye with water immediately, continuously and gently for at least 15 minutes. A safety eyewash device is located in the darkroom for this purpose.
In Case Of An Accident Make sure you are familiar with steps that must be followed in case of an accident. All accidents, no matter how slight, should be reported to the instructor immediately. The school nurse or another qualified person should treat any injuries as soon as possible.